PP formwork board

12MM 15MM 18MM 1220*2440mm Construction Slabs Formwork Polypropylene Hollow Plastic PP Boards for Concrete

The benefit of reusable plastic PP formwork board is the ease with which labourers, even unskilled workforces, can assemble and handle
it. The light-weight nature and flexibility are extremely helpful in storage, transportation, and handling.

Reusable plastic formwork reviews have shown that they can be used for almost any kind of construction. From columns and
pillars to foundations and walls, plastic formwork can do it all.

INSTALLATION INSTRUCTIONS

1. Use the hollow building PP formwork board intersecting surface laid with 15mm thick.

2. Wood square of the distance: (1) on the surface of the intersection (spacing: wood square distance according to the thickness of the slab concrete, in general, the thickness of less than 0.15 m floor (spacing is 200 ~ 250 mm.(2) the shear wall (spacing according to adjust the spacing, height and thickness of the wall to wall height of 2800 mm, 300 mm thick wall, for example, using the PP formwork board (15 mm thickness spacing is 100 ~ 150 mm, if the shear wall, pillar width more than 1 meter, must add the fixed frame.

3. Die shear wall and column puzzle when leaving no gaps, internal Angle (the bottom of the wall) parts must have wood square,beam, wall, PP formwork board connection.Shear wall made 4 after the mold must be assembled into the whole hoisting, then lay flat, reduce labor intensity, forming effect is good.

4. When the nail to the formwork from the formwork edge distance 15 ~ 30 mm, strength wants moderate, nail nails is 40 ~ 50 mm in length, shoulds not be too long or too short.

5. Beam bottom of a piece of wood square must set aside 15 mm seam allowance, wallboard made on wood square seam allowance, it does not leak slurry and wallboard material saving.